The GI80 is a passive piezoelectric AE sensor with built-in 40dB28V preamplifier. And 20kHz-180kHz bandwidth makes it suitable for detecting low frequency acoustic emission signals.

QingCheng develops and produces various and complete series of acoustic emission sensors to meet different application demands of acoustic emission non-destructive testing. Customized sensors are available if you need.

RAEM1-6 is a multi-channel AE testing and monitoring system for NDT and condition monitoring. It inherits all the functions from RAEM1. It can be used as a benchtop testing instrument but also as a remote unattended monitoring system.

RAEM1-6 multi-channel detector was developed based on acoustic wave( acoustic emission) technology and Linux system, combined with SWAE software, it could effectively carry out acoustic emission nondestructive testing for most of the industrial equipm

RAEM1 is not only a wireless remote Acoustic Emission monitoring system but also a standalone single channel detection system. Combined with SWAE software, it can effectively carry out acoustic emission nondestructive testing for most of the industr

RAEM2 is an all-in-one condition monitoring system, combining acoustic emission (AE) sensor, battery, data acquisition and process module and communication modules in a small aluminium alloy cylinder.

The multi-channel acoustic wave (acoustic emission) testing system with a maximum sampling rate of 10M points/second per channel; each channel can be independently set; compatible to SWAE analysis software; three types of chassis are available.

SW6 high-precision ultrasonic thickness gauge, suitable for various materials high-precision measurement needs, can be applied to steel, cast iron, aluminum, copper, zinc, etc.